Axial Flow Fans
Falcon fans are well known in the tea industry for their efficiency and reliability. They are available in wide range to cater to exact air requirements, consuming minimum power.
Aerofoil designed blades are dynamically balanced to ensure optimum air delivery with minimum pressure drop. All fans are constructed to withstand normal operating stress to render many years of trouble free service.
FALCON AXIAL FLOW FANS are high volume discharge fans, used mainly in withering troughs to blow hot/cold air to facilitate better withering of tea. Impellers are Aluminium Die Cast and machine balanced, mounted directly on motor shafts. Blade profiles are designed to deliver optimum air with minimum power consumption.
Specifications
|
Code |
Impeller Dia (in mm) |
Air delivery M3/Hr |
W.G Delivery Pressure CFM |
Starter |
Motor |
RPM |
|
|
KW |
HP |
||||||
|
TA-0922 |
914 |
27,200 |
16,000 |
DOL |
1.5 |
2 |
1000 |
|
TA-1013 |
998 |
34,000 |
20,000 |
DOL |
2.2 |
3 |
1000 |
|
TA-1103 |
1106 |
39,000 |
23,000 |
DOL |
2.2 |
3 |
720 |
|
TA-1105 |
1106 |
51,000 |
30,000 |
MSD |
3.7 |
5 |
1000 |
|
TA-1203 |
1194 |
42,500 |
25,000 |
DOL |
2.2 |
3 |
720 |
|
TA-1207 |
1194 |
57,800 |
34,000 |
MSD |
5.5 |
7.5 |
1000 |
|
TA-1407 |
1346 |
68,000 |
40,000 |
MSD |
5.5 |
7.5 |
1000 |
Centrifugal Fans
FALCON CENTRIFUGAL FANS are high pressure centrifugal discharge type fans used for discharging hot air produced by heaters into Drying Chambers or Withering Troughs. These fans are also used for providing humid from mist chamber to Fermenting Machines. Impellers are die pressed in mild steel to obtain correct blade profiles. The complete impeller assembly is mounted on heavy duty bearings & housed in mild steel casing. These fans are highly flexible to suit the site conditions i.e. motor drive can be set clockwise or counter-clockwise and discharge arrangements can be provided as per site requirement (top angular, bottom, horizontal etc.)
Specifications
|
Code |
Impeller |
Static Pressure |
Air delivery |
Fan |
Starter |
Motor |
RPM |
||
|
M3/Hr |
CFM |
KW |
HP |
||||||
|
TC-2 |
510 |
63.5 |
16,200 |
9,500 |
1645 |
MSD |
3.7 |
5 |
1440 |
|
TC-3 |
760 |
38.0 |
22,100 |
13,000 |
480 |
ASD |
7.5 |
10 |
1440 |
|
TC-4 |
890 |
38.0 |
32,300 |
19,000 |
480 |
ASD |
11.0 |
15 |
1440 |
Induced Draught Fans
FALCON INDUCED DRAUGHT FANS are high vacuum creation fans mainly used for suction of the flue gas from the heater and discharge to the atmosphere. Impellers are die pressed in mild steel to obtain correct profile. The complete impeller assembly is mounted on heavy duty bearings & housed in mild steel casing.
Specifications
|
Code |
Impeller Dia (in mm) |
Air delivery at 60mm W.G. |
Fan RPM |
Starter |
Motor |
RPM |
||
|
M3/Hr |
CFM |
KW |
HP |
|||||
|
TC-1 |
445 |
6,120 |
3,600 |
750 |
DOL |
2.2 |
3 |
1500 |
|
TC-2 |
508 |
10,200 |
6,000 |
750 |
MSD |
3.7 |
5 |
1500 |
|
TC-3 |
635 |
12,750 |
7,500 |
750 |
ASD |
5.5 |
7.5 |
1500 |
|
TC-4 |
760 |
19,700 |
11,600 |
750 |
ASD |
7.5 |
10 |
1500 |